Saturday, June 15, 2024
HomeDroneOverview: iFlight Nazgul ECO FPV Drone - Cheaper than Constructing Your Personal?

Overview: iFlight Nazgul ECO FPV Drone – Cheaper than Constructing Your Personal?

The iFlight Nazgul ECO is probably going some of the inexpensive BNF (bind-and-fly) 5-inch FPV drones out there in 2024. At solely $199.99, it competes with DarwinFPV’s finances mannequin, however the Nazgul ECO provides higher {hardware}, making it a compelling alternative for a lot of. We’re reaching some extent the place shopping for a prebuilt drone makes extra sense than constructing one from scratch, not solely as a result of it’s simpler but additionally as a result of it may be cheaper. Let’s discover out if the Nazgul ECO is the suitable alternative for you on this assessment.

Among the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further value to you) if you happen to make a purchase order after clicking on one in all these affiliate hyperlinks. This helps assist the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra data.

Be taught extra about FPV Drones on this newbie’s information:

The place to Purchase?

You may get the iFlight Nazgul ECO right here:

It comes with the next equipment.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Unbox Accessories

Notice that batteries should not included. You will want some 6S LiPo batteries; I like to recommend 1100mAh, 1200mAh, and 1300mAh sizes:

For spare propellers, get them right here:


  • Flight Controller: BLITZ ATF435
  • ESC: BLITZ E55S 4-IN-1 ESC
  • VTX: BLITZ 1.6W
  • VTX Antenna: Albatross V2
  • Motors: XING E Professional 2207 1800KV
  • Propellers: Nazgul F5
  • Receiver: iFlight ExpressLRS 2.4GHz RX

Nazgul ECO = Cheaper Nazgul V3?

At first look, the iFlight Nazgul ECO appears to be like virtually similar to the favored Nazgul V3. It has the identical design, motors, body, and 3D-printed elements. Even the LED emblem on the underside is similar. Nonetheless, the ECO is nearly $40 cheaper than the V3. How is that potential?

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Front

The ECO makes use of a brand new FC/ESC stack with the extra inexpensive AT32 chip as a substitute of the STM32 F7. I imagine that is the primary purpose why iFlight is ready to supply this drone at such a low worth. As mentioned earlier than on this weblog, the AT32 chip helps to make FPV extra inexpensive, and I feel we’re lastly seeing that pattern take maintain.

Apparently, the default craft title within the Betaflight OSD is “Nazgul V3”, which additional confirms my suspicion that the ECO is simply the V3 with a extra budget-friendly FC/ESC stack. They in all probability simply copied all of the config over and forgot to alter the craft title.

Nearer Take a look at iFlight Nazgul ECO

The iFlight Nazgul ECO has a protracted physique, designed primarily for freestyle and cinematic flying.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Top

It comes with a GoPro mount for straightforward set up on high.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Gopro Camera Mount

And the highest plate provides loads of room for a big LiPo battery.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch 6s Lipo Battery Mount

The construct high quality is spectacular for a drone that solely prices $200, with ample house between parts for cooling. The design is easy and minimalist, specializing in efficiency with out pointless aspect plates that add weight.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Side Fc Esc Stack

The Nazgul ECO features a buzzer, properly mounted within the entrance behind the digicam utilizing a 3D-printed holder, which is uncommon in RTF (ready-to-fly) quads, particularly on this low worth vary.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Buzzer Beeper

The motors are Xing E Professional 2207 1800KV, the identical as these within the Nazgul V3. These are a number of the greatest finances motors out there. The motor wires are protected with plastic tubes, which look tidy {and professional}. Whereas opinions fluctuate on the effectiveness of those tubes in defending motor wires from prop strikes, they do add a clear look and solely weigh 2 to three grams.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Xing E Motor 2207 1800kv

The ECO options iFlight’s emblem with LED mild on the underside, just like the V3.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Bottom

It comes with a strong 1.6W VTX, making it a potential candidate for long-range flying. This VTX can certainly ship the marketed 1.6W output energy, as examined right here:

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Blitz 1.6w Vtx

One distinction between the ECO and the V3 is the antenna. The ECO makes use of the most recent Albatross V2, which appears to be like cool and has an appropriate SWR, as examined right here:

Based mostly on my antenna and VTX testing, channel 1 is likely to be optimum for the perfect vary.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Antenna

The FPV digicam is pretty uncovered to wreck in crashes. It will profit from extra safety from the entrance bumpers.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Analog Camera

The flight controller stack makes use of AT32 chips that are supported in Betaflight 4.5. This flight controller provides 6 UARTs, with solely two getting used (for the receiver and VTX), leaving 4 spares.

Taking the Nazgul ECO aside is straightforward; simply take away the 8 screws on the highest plate.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Dissemble Tear Down

I’m pleasantly stunned that it consists of an Anti Spark Filter, eliminating the spark if you join the LiPo battery. Initially it was a bizarre feeling when plugging within the battery as a result of I might usually anticipate a spark, nevertheless it’s now utterly silent which makes me marvel if the drone has a problem, till I hear the ESC initialization beeps. It’s such a pleasant contact!

Solder high quality seems top-notch.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Xt60 Soldering Receiver

Enhancements I Wish to Make

The ExpressLRS receiver is linked to the flight controller by way of a connector. The very first thing I’d do is take away the connector and solder the receiver on to the flight controller. I’ve had a few cases up to now the place comparable connector failed on me, inflicting random failsafe mid-flight. We don’t usually unplug the receiver, so it’s fairly pointless to have the connector, it’s simply asking for bother.

I’ll add my very own GPS to make use of Rescue Mode in Betaflight (just like return to house). Though iFlight provides GPS as an possibility if you buy the drone, it prices $39 extra! I’m not positive what kind of premium GPS they’re utilizing, nevertheless it feels barely overpriced to me. In case you are not afraid of soldering and organising GPS, you possibly can save fairly a bit of cash by doing it your self. I’ve a information explaining easy methods to setup GPS and Rescue Mode:

The analog digicam “RACECAM” is mediocre. It’s flyable, however the subject of view is kind of small and the publicity adjustments are fairly sluggish when lighting situation adjustments. I’d in all probability improve it to one thing higher just like the Ratel V2:

When you want to enhance vary, it is best to take into account mounting the receiver antenna vertically as defined on this information:

The present sensor is manner off, and wishes calibration.

Easy methods to Setup

The included manuals don’t present a lot element, so I’ve included the method I went by way of to set it up earlier than my maiden flight.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Manual Instructions

To start with, connect the VTX antenna, battery pad, and battery strap, and get the propellers and nuts prepared for set up.

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch Get Started

Binding Receiver

The handbook doesn’t specify the receiver gadget goal, so I needed to discover out in WiFi mode. The receiver is the iFlight 2.4GHz RX, and it comes with ExpressLRS 3.3.0 firmware. I flashed the receiver with the most recent firmware, together with my bind phrase.

Be taught extra about binding ExpressLRS receiver right here:

Betaflight Configuration

The iFlight Nazgul ECO runs Betaflight 4.5.0 out of the field, and the FC firmware goal is IFLIGHT_BLITZ_F435. Yow will discover the default CLI Diff right here. Listed here are the configuration adjustments I made:

  1. Preset: Apply the ExpressLRS Preset based on your packet charge.
  2. PID Tuning, Charge Profile Settings: Apply your individual charges.
  3. Modes: Assign switches to Arm, Angle, Beeper, and Flip Over After Crash.

Closing Ideas

Iflight Nazgul Eco Fpv Drone Bnf Prebuilt 5inch

I completely love the iFlight Nazgul and Evoque collection. They’ve been my go-to pre-built 5″ FPV drones, and now with the Nazgul ECO, it’s much more inexpensive. It’s even cheaper than the “least expensive 5″ FPV drone elements checklist” I put collectively, very spectacular.

Some elements of this drone may present indicators of a finances construct, such because the FPV digicam and lack of GPS, however many of the parts are strong with nice construct high quality, it’s laborious to beat the general worth of the Nazgul ECO.

When you don’t need to construct a drone from scratch and simply need to fly, you possibly can’t go mistaken with this FPV drone. To not point out it’s well-tuned out of the field. Simply slap a GoPro on this factor and you’ll get some fairly superior footage.

You may get the iFlight Nazgul ECO right here:



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments